SA-B05 SAEC System ™ Assault Rifle Replica

SA-B05 SAEC ™ system Assault Rifle Replica

SA-B05 assault rifle replica to Specna is made largely Arms of a uniform zinc and aluminum alloy, reinforced with steel elements in the most vulnerable points of the replica (steel elements - all the screws, pins and tactical sling swivels). Both the SF stock storing the battery and the pistol  grip were made of polymer. The receiver of the replica and the RIS Handguard have undergone the process of Anodizing Which Guarantees a high degree of protection against corrosion. The paint you applied via a process of powder coating , after having the Surface undergo the process of sandblasting prior to the application of paint. This Provides a much higher than usual resistance of the paint is applied abrasion. The receiver bears the USMC markings. < o_p>

The replica's parts are very well aligned - in a way that could accommodate be THUS far noticed solely in that replicas dry top-tier manufacturers as G&P or Classic Army, the replica is also perfectly balanced. This allows for an almost ideal maneuverability of the replica and its weight is almost unnoticeable once the replica has been shouldered.

The replica features a new generation quick release spring system so-called SAEC ™ . That is a large system, it is possible that rapidly and quickly adapt the power of the replica to the conditions expected on the playing field without the necessity to have the access to a workshop or a set of special tools. The spring change process is even faster than in the case of the previous version of the system.

Thanks to SAEC ™ System, there is no need to take out the gearbox from the replica - all that is required is a slide remove the stock (no tools are Necessary - it is attached with a ring and tightened the latch), afterward it is Necessary is located underneath loosen the pin along with a bearing-mounted spring slide. In exchange the main spring, screw in the pin back in the body, attach the stock ... and we're back in the game! The entire operation lasts shoe and a moment, let us say it again, does not require the use of any tools.

The Advantages of SAEC ™ system are hard to overstate. In the light of the current tendency in the whole Europe to use legal limitations regarding to the muzzle velocity of replicas or internal regulations inside various groups, the System Guarantees the User and varied set of possibilities and plenty of freedom. SAEC ™ system allows with a minimal amount of time to change the main spring thusly customize the muzzle velocity towards the area of ​​the game in such a way so as guarantee is an ideal compromise between The effectiveness of fire and safety for the User himself as well as other Participants.

The replica is fully compatible with LiPo and LiFe batteries. Due to the base muzzle velocity of ~ 430 FPS provided by the main spring installed by default to the manufacturer, the replica is perfect for operating on a medium range. The set also includes an M90 spring Which allows to reduce the muzzle velocity is ~ 310 FPS and as a result is Adapt the replica for close-ranged and indoor operations.

A reinforced at the cylinder level gearbox contains a steel spring That slide is an element of SAEC ™ system and mounted on 8 mm ball bearings and washers steel gears . The system is secured with four anti-reversal latches. A light, made of polycarbonate polymer piston is equipped with and set of teeth steel in order to Increase its durability. also Implemented were and type 2 cylinder and a steel circuit-breaker as well as a metal Hop-up chamber .

The upgraded version features an array of new, reinforced parts dry as _

- set of reinforced, steel gears
- bearing-mounted, steel spring slide
- light, polymer piston with a steel strip
- aluminum piston head tightened
- a metal cylinder head
- tightened, metal nozzle < / span>

The replica is equipped with a 22 mm top rail RIS, RIS Handguard and an adjustable stock. The top features a metal RIS rail flip-up iron sights, Which can be freely detached in order to make room for the attachment of a chosen optoelectronic aiming device. Due to the extendable stock with an anti-slip pad stock, it is possible Adapt is the replica's length to the body type and preferences of the User. AND standard flash hider is based on a 14 mm left-hand thread Which allows The attachment of a silencer in its place.

In order that enhance the realism of the game, the replica also features an operational catch-bolt mechanism .

The replica comes with a steel, BB 300, Hi-Cap magazine.

Specna Arms replicas are compatible with many magazines available on the market, from manufacturers like_
- BOYI
- Airsoft Systems,
- SRC
- King Arms,
- MAG
- STAR
- ACM.

™ SAEC system is included in the European Patent with a number _ 002639500

Additional accessories visible in the preview photographs are not part of the set!

The set does not include a battery or a charger.

The set includes:

- replica
- magazine
- Fixed iron sights
- additional main spring

ATTENTION:

According This Report Number HKGEC1600157401 the product meets the Requirements of the European Union Compliance - Restriction of Hazardous Substances 2011/65 / EU directive amends That annex II The 2002/95 / EC Concerning the limitation of dangerous substances in electronics.

Which Means That Specna Arms free from harmful materials dry as_
- lead
- mercury
- cadmium
- hexavalent chromium
- polybrominated biphenyl (PBB)
- polybrominated diphenyl ether (PBDE)