AM-015 subcarbine replica - black
The latest series of Amoeba Airsoft replicas is based on the well-known design of AR assault rifles, however, these replicas have been appropriately modified and enriched with many design details and interesting technical solutions that improve not only their functionality, but also their appearance. Thanks to its compact dimensions, the AM-015 is a very handy and shortest version of the Amoeba series replicas, which makes it ideal for operating in CQB airsoft operations.
The replica's body is made of reinforced nylon. The quality of the materials used makes it hard to recognize at first glance that it is plastic and not metal. The body has impressive markings, including model, caliber, and the Amoeba Airsoft logo. Metal was used for the production of the outer barrel, the sound amplifier (used to confuse the opponent), the thread cover and small parts. The pistol grip is properly profiled, covered with a rough, non-slip texture, which increases the grip and comfort. The magazine release button has been enlarged to make it easier to use.
The replica is equipped with a lightweight plastic stock with adjustable length, which houses the battery. Access to the hop-up system adjustment is obtained as standard for this type of construction - by pulling the charging handle back and revealing the shell ejector window.
The AM-015 has a top 22mm RIS rail, so you can install a whole range of additional accessories on the replica, from optical sights to lighting. The subcarabiner has mechanical sights_ a folding front sight and a flip-up sight, mounted on a RIS rail. In addition, the replica is equipped with a small RIS front that allows for the installation of a tactical grip (included) or other additional accessories.
The outer barrel is finished with a 14mm clockwise thread, which allows for the installation of an extension of the outer barrel / silencer.
Amoeba Airsoft replicas have the ability to quickly replace the spring without the need to disassemble the gearbox skeleton. The heart of the replica is a reinforced, slightly modified v.2 gearbox with an integrated EFCS module - Electronic Firing Control System. It controls the work of the trigger unit, supporting smooth mechanics, and above all, it shortens the engine response time to pressing the trigger. The standard contact block has been replaced by an electronic system. EFCS also has a built-in MOSFET chip.
EFCS significantly increases the life of the mechanism, and thus the entire replica, and allows the use of high voltage batteries, including LiPo. After buying an external, dedicated EFCS programmer, we will be able to set the order of fire modes, as well as the burst mode (3-ball series).
The magazine attached to the replica is a mid-cap with a capacity of 140 BBs. The magazine housing is made of special rubber, with an ergonomic shape and additional ribs to facilitate the use of the magazine , and to ensure no slippage at key moments.
The set does not include a battery or a charger.
The additional accessories seen in some pictures are not part of the set. The full list of what the set contains can be found below.
The set includes:
- a replica
- magazine
- tactical grip
- speedloader for the magazine
- ramrod
- user manual
The replica's body is made of reinforced nylon. The quality of the materials used makes it hard to recognize at first glance that it is plastic and not metal. The body has impressive markings, including model, caliber, and the Amoeba Airsoft logo. Metal was used for the production of the outer barrel, the sound amplifier (used to confuse the opponent), the thread cover and small parts. The pistol grip is properly profiled, covered with a rough, non-slip texture, which increases the grip and comfort. The magazine release button has been enlarged to make it easier to use.
The replica is equipped with a lightweight plastic stock with adjustable length, which houses the battery. Access to the hop-up system adjustment is obtained as standard for this type of construction - by pulling the charging handle back and revealing the shell ejector window.
The AM-015 has a top 22mm RIS rail, so you can install a whole range of additional accessories on the replica, from optical sights to lighting. The subcarabiner has mechanical sights_ a folding front sight and a flip-up sight, mounted on a RIS rail. In addition, the replica is equipped with a small RIS front that allows for the installation of a tactical grip (included) or other additional accessories.
The outer barrel is finished with a 14mm clockwise thread, which allows for the installation of an extension of the outer barrel / silencer.
Amoeba Airsoft replicas have the ability to quickly replace the spring without the need to disassemble the gearbox skeleton. The heart of the replica is a reinforced, slightly modified v.2 gearbox with an integrated EFCS module - Electronic Firing Control System. It controls the work of the trigger unit, supporting smooth mechanics, and above all, it shortens the engine response time to pressing the trigger. The standard contact block has been replaced by an electronic system. EFCS also has a built-in MOSFET chip.
EFCS significantly increases the life of the mechanism, and thus the entire replica, and allows the use of high voltage batteries, including LiPo. After buying an external, dedicated EFCS programmer, we will be able to set the order of fire modes, as well as the burst mode (3-ball series).
The magazine attached to the replica is a mid-cap with a capacity of 140 BBs. The magazine housing is made of special rubber, with an ergonomic shape and additional ribs to facilitate the use of the magazine , and to ensure no slippage at key moments.
The set does not include a battery or a charger.
The additional accessories seen in some pictures are not part of the set. The full list of what the set contains can be found below.
The set includes:
- a replica
- magazine
- tactical grip
- speedloader for the magazine
- ramrod
- user manual
$111.79
Original: $372.65
-70%AM-015 subcarbine replica - black—
$372.65
$111.79Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The latest series of Amoeba Airsoft replicas is based on the well-known design of AR assault rifles, however, these replicas have been appropriately modified and enriched with many design details and interesting technical solutions that improve not only their functionality, but also their appearance. Thanks to its compact dimensions, the AM-015 is a very handy and shortest version of the Amoeba series replicas, which makes it ideal for operating in CQB airsoft operations.
The replica's body is made of reinforced nylon. The quality of the materials used makes it hard to recognize at first glance that it is plastic and not metal. The body has impressive markings, including model, caliber, and the Amoeba Airsoft logo. Metal was used for the production of the outer barrel, the sound amplifier (used to confuse the opponent), the thread cover and small parts. The pistol grip is properly profiled, covered with a rough, non-slip texture, which increases the grip and comfort. The magazine release button has been enlarged to make it easier to use.
The replica is equipped with a lightweight plastic stock with adjustable length, which houses the battery. Access to the hop-up system adjustment is obtained as standard for this type of construction - by pulling the charging handle back and revealing the shell ejector window.
The AM-015 has a top 22mm RIS rail, so you can install a whole range of additional accessories on the replica, from optical sights to lighting. The subcarabiner has mechanical sights_ a folding front sight and a flip-up sight, mounted on a RIS rail. In addition, the replica is equipped with a small RIS front that allows for the installation of a tactical grip (included) or other additional accessories.
The outer barrel is finished with a 14mm clockwise thread, which allows for the installation of an extension of the outer barrel / silencer.
Amoeba Airsoft replicas have the ability to quickly replace the spring without the need to disassemble the gearbox skeleton. The heart of the replica is a reinforced, slightly modified v.2 gearbox with an integrated EFCS module - Electronic Firing Control System. It controls the work of the trigger unit, supporting smooth mechanics, and above all, it shortens the engine response time to pressing the trigger. The standard contact block has been replaced by an electronic system. EFCS also has a built-in MOSFET chip.
EFCS significantly increases the life of the mechanism, and thus the entire replica, and allows the use of high voltage batteries, including LiPo. After buying an external, dedicated EFCS programmer, we will be able to set the order of fire modes, as well as the burst mode (3-ball series).
The magazine attached to the replica is a mid-cap with a capacity of 140 BBs. The magazine housing is made of special rubber, with an ergonomic shape and additional ribs to facilitate the use of the magazine , and to ensure no slippage at key moments.
The set does not include a battery or a charger.
The additional accessories seen in some pictures are not part of the set. The full list of what the set contains can be found below.
The set includes:
- a replica
- magazine
- tactical grip
- speedloader for the magazine
- ramrod
- user manual
The replica's body is made of reinforced nylon. The quality of the materials used makes it hard to recognize at first glance that it is plastic and not metal. The body has impressive markings, including model, caliber, and the Amoeba Airsoft logo. Metal was used for the production of the outer barrel, the sound amplifier (used to confuse the opponent), the thread cover and small parts. The pistol grip is properly profiled, covered with a rough, non-slip texture, which increases the grip and comfort. The magazine release button has been enlarged to make it easier to use.
The replica is equipped with a lightweight plastic stock with adjustable length, which houses the battery. Access to the hop-up system adjustment is obtained as standard for this type of construction - by pulling the charging handle back and revealing the shell ejector window.
The AM-015 has a top 22mm RIS rail, so you can install a whole range of additional accessories on the replica, from optical sights to lighting. The subcarabiner has mechanical sights_ a folding front sight and a flip-up sight, mounted on a RIS rail. In addition, the replica is equipped with a small RIS front that allows for the installation of a tactical grip (included) or other additional accessories.
The outer barrel is finished with a 14mm clockwise thread, which allows for the installation of an extension of the outer barrel / silencer.
Amoeba Airsoft replicas have the ability to quickly replace the spring without the need to disassemble the gearbox skeleton. The heart of the replica is a reinforced, slightly modified v.2 gearbox with an integrated EFCS module - Electronic Firing Control System. It controls the work of the trigger unit, supporting smooth mechanics, and above all, it shortens the engine response time to pressing the trigger. The standard contact block has been replaced by an electronic system. EFCS also has a built-in MOSFET chip.
EFCS significantly increases the life of the mechanism, and thus the entire replica, and allows the use of high voltage batteries, including LiPo. After buying an external, dedicated EFCS programmer, we will be able to set the order of fire modes, as well as the burst mode (3-ball series).
The magazine attached to the replica is a mid-cap with a capacity of 140 BBs. The magazine housing is made of special rubber, with an ergonomic shape and additional ribs to facilitate the use of the magazine , and to ensure no slippage at key moments.
The set does not include a battery or a charger.
The additional accessories seen in some pictures are not part of the set. The full list of what the set contains can be found below.
The set includes:
- a replica
- magazine
- tactical grip
- speedloader for the magazine
- ramrod
- user manual
